Coupling Puller for the Saga with Yanmar Engine

 

Moonstruck

The following photos show two different coupling pullers designed for use on the Saga 43.  There is limited space to remove the coupling from the prop shaft and these special purpose coupling pullers will do the job.  The first photos were funished by John on Moonstruck and the better design.  This design allows the puller to be held when the pressure is on the shaft by the screw..

 

 

 

 

Discovery

The following pictures is the puller I built for Discovery.  The puller will work fine if I can find a way to hold the puller from turning when I tighten the center bolt against the shaft..